The Complete Guide To Makita 6791d: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

Makita 6791D Information

The Makita 6791D is a cordless screwdriver that is designed for light-duty applications. It is powered by a 9.6V Ni-MH battery and has a maximum torque of 24 Nm. The screwdriver has a two-speed transmission with a range of 0-2000 RPM and 0-400 RPM. It also has a belt clip for easy carrying.

ImageImage of Makita 6791D cordless screwdriver

Full specifications

SpecificationValue
Voltage9.6 V
Battery typeNi-MH
Battery capacity2000 mAh
Maximum torque24 Nm
Two-speed transmission0-2000 RPM, 0-400 RPM
Belt clipYes

Features

  • Lightweight and compact design
  • Powerful 9.6V motor
  • Two-speed transmission for a variety of applications
  • Belt clip for easy carrying
  • Ergonomic grip for comfortable use
  • Long lasting Ni-MH battery

What's in the box

  • Makita 6791D cordless screwdriver
  • 9.6V Ni-MH battery
  • Charger
  • Belt clip
  • Instruction manual

Conclusion

The Makita 6791D is a great choice for anyone looking for a lightweight and compact cordless screwdriver for light-duty applications. It is powerful enough for most tasks, and the two-speed transmission gives you the flexibility to choose the right speed for the job. The belt clip makes it easy to carry, and the long lasting Ni-MH battery will keep you working all day long.

Additional information

The Makita 6791D is backed by a 3-year warranty. It is available for purchase online and at most hardware stores.

Comparison to other models

The Makita 6791D is comparable to other cordless screwdrivers in its class. It is slightly smaller and lighter than some other models, but it has the same power and features. The Makita 6791D is a good value for the price.

Makita 6791D Compare with Similar Item

a table comparing the Makita 6791D with some similar items:

FeatureMakita 6791DMilwaukee 2737-20DeWalt DWE575S
Motor15 amp15 amp15 amp
No-load speed3,000 RPM3,000 RPM3,000 RPM
Max. cut depth2-1/2 inches2-1/2 inches2-1/2 inches
Bevel capacity45 degrees45 degrees45 degrees
Weight6.6 pounds6.8 pounds6.7 pounds
Price$149$169$159

As you can see, the Makita 6791D is very similar to the Milwaukee 2737-20 and the DeWalt DWE575S. All three tools have a 15 amp motor, a no-load speed of 3,000 RPM, and a max. cut depth of 2-1/2 inches. The Makita is slightly lighter than the other two tools, but it is also slightly more expensive.

Ultimately, the best tool for you will depend on your individual needs and preferences. If you are looking for the lightest tool, the Makita 6791D is a good option. If you are looking for the most affordable tool, the DeWalt DWE575S is a good option. And if you are looking for the most powerful tool, the Milwaukee 2737-20 is a good option.

Here is a more detailed comparison of the three tools:

Makita 6791D

  • Pros: Lightweight, compact, powerful
  • Cons: Slightly more expensive than the competition

Milwaukee 2737-20

  • Pros: Powerful, durable, long warranty
  • Cons: Slightly heavier than the competition

DeWalt DWE575S

  • Pros: Affordable, versatile, easy to use
  • Cons: Not as powerful as the competition

I hope this helps!

Makita 6791D Pros/Cons and My Thought

The Makita 6791D is a cordless impact wrench that is known for its power and durability. It is powered by a 18V LXT lithium-ion battery, and it can generate up to 1,400 foot-pounds of torque. This makes it a great choice for heavy-duty applications, such as lug nut removal and demolition.

Pros:

  • Powerful: The Makita 6791D is one of the most powerful cordless impact wrenches on the market. It can generate up to 1,400 foot-pounds of torque, which is more than enough for most applications.
  • Durable: The Makita 6791D is built to last. It is made from high-quality materials, and it is designed to withstand the rigors of heavy-duty use.
  • Lightweight: The Makita 6791D is relatively lightweight, making it easy to use for long periods of time.
  • Ergonomic: The Makita 6791D is designed to be comfortable to use. The handle is well-shaped, and the tool is well-balanced.

Cons:

  • Expensive: The Makita 6791D is a premium tool, and it comes with a premium price tag.
  • Battery life: The battery life of the Makita 6791D is not the best. You may need to bring a spare battery if you are doing a lot of work.
  • Noise: The Makita 6791D is a noisy tool. If you are sensitive to noise, you may want to consider a different model.

User reviews:

Overall, the Makita 6791D is a well-respected tool that is known for its power and durability. User reviews are generally positive, with many users praising the tool's power and performance. However, some users have complained about the battery life and noise level.

My thoughts:

I think the Makita 6791D is a great tool for anyone who needs a powerful and durable cordless impact wrench. It is not the cheapest tool on the market, but it is worth the investment if you need a tool that can handle heavy-duty applications.

If you are on a budget, there are other cordless impact wrenches that are less expensive. However, if you need the best of the best, the Makita 6791D is a great option.

Makita 6791D Where To Buy

some places where you can buy the Makita 6791D and spare parts:

  • Makita Direct: This is the official website of Makita, so you can be sure that you are getting genuine parts. They also offer free shipping on orders over $50. Image of Makita Direct website
  • Walmart: Walmart is a great option if you are looking for a low price. They often have sales on Makita tools, so you can save some money. Image of Walmart website
  • Amazon: Amazon is another great option for finding Makita tools and parts. They have a wide selection of products and often have competitive prices. Image of Amazon website
  • Best Buy: Best Buy is a good option if you are looking for a brick-and-mortar store where you can buy Makita tools and parts. They have a wide selection of products and offer free shipping on orders over $35. Image of Best Buy website
  • Lowes: Lowe's is another good option for finding Makita tools and parts at a brick-and-mortar store. They have a wide selection of products and offer free shipping on orders over $45. Image of Lowes website
  • eBay: eBay is a good option if you are looking for a used Makita 6791D or spare parts. You can often find great deals on eBay, but be sure to do your research to make sure that you are getting a genuine part. Image of eBay website

I hope this helps!

Makita 6791D Problems and Solutions

The Makita 6791D is a powerful and versatile cordless drill, but it can experience some common issues. Here are a few of the most common problems and solutions, as recommended by experts:

  • The drill won't turn on. This is often caused by a dead battery. Make sure the battery is fully charged, or try using a different battery. If the drill still won't turn on, there may be a problem with the switch. In this case, you will need to contact Makita for repairs.
  • The drill won't drill through hard materials. This is often caused by dull drill bits. Make sure the drill bits are sharp and clean. If the drill bits are still dull, you will need to replace them.
  • The drill is overheating. This is often caused by prolonged use at high speeds. Allow the drill to cool down before using it again. If the drill continues to overheat, there may be a problem with the motor. In this case, you will need to contact Makita for repairs.
  • The drill is making strange noises. This could be a sign of a problem with the gears or bearings. If you hear strange noises, stop using the drill and contact Makita for repairs.

Here are some additional tips for preventing problems with your Makita 6791D:

  • Store the drill in a cool, dry place.
  • Avoid using the drill in wet or dusty conditions.
  • Clean the drill regularly.
  • Replace the battery regularly.
  • Use the drill for its intended purpose.

By following these tips, you can help to keep your Makita 6791D in good working order for many years to come.

Here are the step-by-step instructions for each of the solutions:

  • To fix a dead battery, you will need to charge the battery or replace it. To charge the battery, connect it to the charger and allow it to charge for the specified amount of time. If the battery is still dead after charging, you will need to replace it.
  • To fix a drill that won't drill through hard materials, you will need to sharpen the drill bits. To sharpen the drill bits, you can use a sharpening stone or a drill bit sharpener. Once the drill bits are sharpened, they should be able to drill through hard materials.
  • To fix a drill that is overheating, you will need to allow the drill to cool down. To cool down the drill, you can stop using it and let it rest for a few minutes. You can also try using the drill at a lower speed.
  • To fix a drill that is making strange noises, you will need to contact Makita for repairs. The strange noises could be a sign of a problem with the gears or bearings, and Makita will be able to diagnose and repair the problem.

I hope this helps!

Makita 6791D Manual

Makita 6791D Cordless Screwdriver

Safety Information

  • Read all safety warnings and instructions before using this tool.
  • Keep this tool out of reach of children and unauthorized personnel.
  • Do not use this tool if it is damaged or malfunctioning.
  • Use only the batteries and chargers specified by Makita.
  • Do not use this tool in explosive atmospheres.
  • Wear safety glasses and gloves when using this tool.
  • Be aware of your surroundings and do not use this tool in wet or icy conditions.
  • Disconnect the battery pack from the tool before making any adjustments or repairs.

Before Use

  • Charge the battery pack fully before using the tool.
  • Select the appropriate bit for the application.
  • Tighten the bit securely in the chuck.
  • Set the torque setting to the appropriate level.

Troubleshooting

  • If the tool does not work, check the battery pack to make sure it is fully charged.
  • If the tool still does not work, check the bit to make sure it is properly tightened in the chuck.
  • If the tool still does not work, contact Makita customer service for assistance.

Maintenance

  • Keep the tool clean and free of debris.
  • Inspect the tool regularly for signs of wear or damage.
  • Replace worn or damaged parts immediately.
  • Do not disassemble the tool.

Warranty

This tool is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the tool fails during the warranty period, it will be repaired or replaced free of charge.

Contact Information

Makita USA

1355 Kountze Street

Anaheim, CA 92805

1-800-462-5682

Additional Information

  • This tool is designed for professional use only.
  • Do not use this tool for any other purpose than its intended use.
  • Do not modify this tool in any way.
  • Makita is not responsible for any damage caused by misuse or improper use of this tool.

Thank you for choosing Makita.

Comments

Post a Comment

Popular posts from this blog

Beha-amprobe Amp-320-eur: Understanding Key Features, Comparisons, Manuals, And Reputable Buying Options

Beha-Amprobe AMP-320-EUR Information The Beha-Amprobe AMP-320-EUR is a true-RMS clamp meter that offers a comprehensive range of measuring functions for modern industrial environments, motor testing and HVAC applications. It features a large, backlit display, automatic range selection, and a variety of safety features. Introduction The AMP-320-EUR is a versatile tool that can be used for a wide range of electrical measurements. It can measure AC and DC current, voltage, resistance, capacitance, frequency, temperature, and ionization current. It also features a continuity beeper, a low pass filter, and a non-contact voltage detector.
Read more

The Complete Guide To Dewalt Dw367: Specifications, Pros And Cons, Troubleshooting, And Buying Tips

DeWalt DW367 Information The DeWalt DW367 is a 15-amp, 7-1/4-inch circular saw that is designed for professional use. It is a lightweight and powerful saw that is capable of making precise cuts in a variety of materials. The DW367 features a 50-degree bevel capacity with stops at 0, 22.5, 45, and 90 degrees. It also has a clear line of sight through the lower guard for better visibility when making cuts. Specifications
Read more

Makita Sp6000 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Image
Makita SP6000 Information The Makita SP6000 is a 1300W plunge saw that is designed for precision cutting in a variety of materials, including wood, plywood, MDF, and aluminum. It features a powerful motor that delivers smooth, consistent cuts, and an electronic speed control that allows you to adjust the speed to match the material you are cutting. The saw also has a variable speed dial, a built-in current limiter, and an electronic soft start feature for smooth start-ups. Image of Makita SP6000 plunge saw Here is a table of the full specifications of the Makita SP6000:
Read more